May 1st 2020
Got a new toy, got to hurry up and get it in it’s already starting to get warm. Everyone has GOT to put one of these in their bus! Check the Parts Purchased link for …
Got a new toy, got to hurry up and get it in it’s already starting to get warm. Everyone has GOT to put one of these in their bus! Check the Parts Purchased link for …
Hooked up the shunt today. It’s neat to see what the various devices draw for power.
I decided to move the lounge seats to this side of the bus. They aren’t fixed in place yet. I need to figure out the electrical closet size first, then tighten the bed and fasten …
Reinstalled the bunk bed frame, I was going to buy a metal bunkbed frame and use that instead, but I already had this built from round 1 of the renovation, so I re-purposed it. It …
Solar Panel Day! Due to Covid I’ve got a lot of free time. I finally got around to putting the solar panels on the roof. Used Butyl tape under the mounts and then self leveling …
Took pictures and measurements to start with mounting things under the bus. Black tank, AC Compressor, etc.
Finished second layer of polyiso in the walls and started cutting and painting 1/2″ ply to cover the walls in. It really looks nice now!
Lots of wiring the last few days. I removed the 15amp shore power connector because the ground failed at some time, and I replaced it with a 30amp shore power connector. I removed the Power …
Mounted the Breaker panel. Picked this up from Menards, it’s for an outdoor spa and has spots for 2 breakers. Used 2 15amp breakers. Rough mounted the Fuse block as well. I also cut in …
Took a bit of time off the bus to buy a new vehicle. I got a 2012 Suburban. Now I can haul full sheets of plywood. I took some pics of the big items I …