Sorry for not posting anything in awhile. It was a long and cold winter and I had zero motivation to do anything with the bus other than keep the batteries charged.
I finally got around to finish rebuilding the turbo. I didn’t take many pictures of reassembly. But here are the pics I did take.
I finished reassembly of the turbo core, replaced all the bearing and snap rings. Painted the turbo and manifold with Por15 High Temp spray paint and baked in the oven to cure it. Put a new Boost elbow in just for the heck of it. Adjusted the wastegate to open at 25-30psi, I hope. Drilled and tapped the fitting for the EGT sensor.